Babypulse is a portable fetal doppler similar to units used by your midwife, GP or obstetrician and is designed and manufactured by one of the leading fetal doppler companies for home use.

The unit is light weight and extremely easy to use with only an on/off switch and variable volume control to contend with. Babypulse has a highly sensitive transducer allowing you to detect your baby as early as 8 weeks.
The fetal heart sounds are easily located using the easy to manage transducer while internal signal processing minimises any noise artefacts.

You listen to baby's heart beat from the babypulse built in loudspeaker or you can plug in standard headphones and listen quietly yourself. The volume is controlled from the side of the babypulse.

You can even connect babypulse to your computer or tape recorder and record baby's heart beat for absent family and friends.

The unit is powered by a standard 9V battery, which provides over 9 hours of use.

Babypulse plus adds to the standard babypulse digital fetal heart rate display.

Using a large, clear LCD display the heart rate is easy to read and with a little practice is as easy to use as the standard babypulse.
Operation

babypulse

babypulse plus
Principle Doppler effect ultrasound Doppler effect ultrasound

Frequency

2 MHz continuous wave

 2 MHz continuous wave

Transducer

 dual crystal narrow beam dual crystal narrow beam

Output power

less than 10mW

 less than 10mW

Audio response

300Hz to 1KHz

 300Hz to 1KHz

Unit Controls

Keys

1 Key (for unit on/off)

 1 Key (for unit on/off)

Controls

Rotary volume

 Rotary volume

Indicators

Yellow battery low LED

 LCD display of FHR and Battery low

Power Supply

Battery

MN1604 (PP3) 9V Alkaline Manganese

 MN1604 (PP3) 9V Alkaline Manganese

Expected battery life

more than 9 hours

 more than 7 hours
Battery Saver auto off after appox 3 mins auto off after 1 min from signal loss

Outputs

Headset

Audio output to optional headset

 Audio output to optional headset
Serial N/A RS232

General

Enclosure

ABS

 ABS

Size

150mm by 75mm nominal

 150mm by 75mm nominal

Weight

295g typically including transducer

 295g typically including transducer

Safety

Classification

Class 1 Type B - IEC 60601-1

 Class 1 Type B - IEC 60601-1
babypulse and babypulse plus is a trademark of Ultrasound Technologies Ltd
Specification subject to change without notice
© Ultrasound Technologies Ltd 2005